Steam Traps and Steam Trap Repair Parts




The days of cheap energy are over, and there is strong likelihood that fuel costs will continue to escalate. It is imperative that a steam system be regularly monitored for loss. When steam traps are neglected and left to operate improperly, they can, over time, cause the failure of other traps and components within the system.
 

As you probably know, there are many benefits for a facility with the foresight and wisdom to initiate a steam trap survey and repair program.  If you need any further assistance in designing a steam trap repair program you can contact Cici Boiler Rooms. Cici stocks one of the largest steam trap inventories in the Midwest. Our stock includes popular brands such as Spirax Sarco and Hoffman. However, we also stock repair kits for all kinds of steam traps!

 



New Steam Traps
Thermostatic  *  Float & Thermostatic  *  Inverted Bucket  *  Thermodynamic

 

Thermostatic Steam Traps
Balanced pressure thermostatic steam traps are devices that sense the temperature difference between condensate and saturated steam.  These traps remain closed until the condensate collecting in the trap subcools enough to actuate the valve.  The amount of subcooling varies among designs, and is tailored to various applications ranging from biotechnology processing to apartment steam radiators.  Because these traps respond to temperature, they have excellent air venting characteristics.  Applications with quick or frequent start-ups perform best using balanced pressure thermostatic traps.

 

Float & Thermostatic Steam Traps
Float and thermostatic steam traps are commonly used on process applications where they function to drain condensate from a heat exchanger.  These types of traps respond quickly to changing loads, and they have a quiet, modulating action.  Rising water level inside the trap causes the float to rise.  This pulls the valve plug away from the seat, opening the valve.  After the condensate has been drained away, the float falls and valve plug is guided into the seat to close the valve.  An integral thermostat functions to vent air and other non-condensable gases from the system.


 
Inverted Bucket Steam Traps
Inverted bucket steam traps utilize an open, inverted, bucket as a type of float.  Steam fills the inverted bucket which causes it to float and close the valve.  Condensate collecting under the bucket reduces its buoyant force and the bucket falls, pulling the valve open.  These traps find use in a wide variety of applications.  Small traps are used on steam drip and product tracing applications.  Large traps are used in some process applications.  These traps feature a rugged, simple design.  Hardened internals ensure long life and reliable service.
 

Steam Trap Repair Parts

We can provide REPAIR PARTS for these brands:
All-Vac Adsco/American District Steam Co. American Sterilizer
Arco Anderson Co. Barnes & Jones
Belknap Belvac Thermoflier Bishop, Babcock & Becker
Bottom Valve Co. Braukmann Broomell
Campbell Capital Brass Works Cashin-Thermoflex
Castle Crane Valve Cromwell
Cryer D.G.C. Detroit Lub. Valve
Donnelly Dunham-Bush/Mepco Erwel
Fairbanks Valves Farris Fulton Sylphon Air Valve
Galbras General Heating Supply Haines Vento
Hoffman Ideal Illinois
Jenkins Valves Johnson Service Kellogg-MacKay (KelMac)
O.E. Kelmarc Kennedy Valve Levine
Lilly (Nicholson) L-R-P (Longer Regulated Protection) Marine Galligan
Marsh Traps McAlear Traps Milwaukee (Milvaco)
Monash-Younker Mouat Nafco
National Pump Nicholson & Co. Ohio Brass Valve
Peco (Pittsburgh Engineering) Peerless Pierce, Butler & Pierce
Richardson Richardson-Vapor Seal Riggio
Roath Mfg. Co./Thermotrap Saltsier & Weinser Sarco
Scanlon-Morris Semco Simplex
Spirax C.E. Squires Stay-Rite
Sterling-Hyde Park Sterling Stickle Steam Specialty
Strong S&W Air Pell T.S. (Thermal System)
Thermidaire Trane H.O. Trerice
Trojan Twin City Vapor Heating Co.
Veco Warren Webster Watson McDaniel
Watts Wiley Wilmot - Castle
Yarway ...and many more!  Just ask!

 
 

 

Note:  We do not a factory representative for all of the above brands.  We simply can supply repair parts for them.  For specific questions regarding these traps, please contact the respective manufacturers.